|
Item# |
Image |
Description |
Price |
| W793 |
 |
Vintage Agassiz pocket watch movement. This movement has a
broken staff, but I think you can get it running if you put a staff in
it. The movement is very clean with no rust anywhere. It is an
open case movement and the stem would be at the 12:00 marker. Under the
dial it is marked Agassiz with the fish logo and also Wittnauer [they
partnered together back in the 20s].
Brand:
Agassiz
Model [caliber]:
?
Width:
43mm
Movement type: mechanical
[windup]
Jewel count:
17 [6 adjustments]
Country of origin: Switzerland
Year of manufacture:
1920s
Condition of movement:
not running
Staff condition:
bad
Dial: porcelain
with no cracks but it does have one small chip right at the center hole
Hands:
no
Stem:
no
Sold as-is for parts or repair. |
$300.00
|
| W739 |
 |
Vintage Waltham chronograph movement - model 1874 14 size. The
movement is complete except for one spring [lever ] that broke off when
I was handling the movement [it will be included]. It is the
spring/lever that I am guessing zeros the sweep wheel. The balance
swings and the staff is good. The pallet fork was not moving and I
found that the roller jewel is missing. I think if you replace the
roller jewel that the movement will run. There is tarnishing on the
backside of the movement from sitting in a drawer for years, but there
isn't any real rust. This is a repairable movement.
Sold as-is for parts or repair. |
$200.00
|
| W731 |
 |
Agassiz high
grade pocket watch movement that would be good for parts. It is 36 mm
wide and stem wind and set. This movement has water damage. I had it
cleaned up but it is only good for parts. The ratchet and crown wheels
are missing. Many of the winding parts are gone. The train wheels and
the jewels seem good. The balance, escape wheel and pallet fork are
bad. I think you can salvage some good parts from this movement, but
overall it is not repairable.
Sold as-is for parts or repair. |
$85.00
|
| W733 |
 |
Perret
hi grade pocket watch movement that was made in Locle. It is 41mm wide
and key wind / key set. It will run for a few seconds. the balance
wheel seems to be at an angle, so either the staff has a bent pivot or
one of the arms on the balance wheel may be bent. Nice movement with no
rust. You should be able to get this movement running with a little
work.
Sold as-is for parts or repair. |
$85.00
|
| W734 |
 |
Leonville hi
grade pocket watch movement that was made in Locle. It is 43mm wide. It
is stem wind and I believe it was lever set, but the lever is
missing. It has a broken balance staff. There is no rust but it does
have some minor spotting on the winding wheels and the micrometer
regulator. The arbor is there for the seconds hand but it is bent and it
will be hard to straighten it. No rust.
Sold as-is for parts or repair. |
$65.00
|
| W735 |
 |
International high
grade pocket watch movement that would be good for parts. It is signed
International Watch co on the dial and on the movement it is marked Droz
& Perret. It is 45mm wide and it is stem wind and nail set. This
movement has water damage. I had it cleaned up but it is only good for
parts. The ratchet and crown wheels are rusty but could be polished. The
train wheels and the jewels seem good but the arbors and pinions are
rusty. The balance, escape wheel and pallet fork are bad. the center
pinion is broken off and the canon pinion is rusted on to it. I think
you can salvage some good parts from this movement, but overall it is
not repairable. It is a hunting case movement.
Sold as-is for parts or repair. |
$100.00
|
| W736 |
 |
High grade vintage pocket
watch movement that was made in Switzerland by Longines
and marked S. Kurtz Zook.
Zook was a civil war general who died at Gettysburg. His family ran a
jewelry store and used his name on this pocket watch. It is 40mm wide
and stem wind/ stem set. It was made in 1905. It is an open
face movement. It is running but it has not been serviced.
Sold as-is for parts or repair. |
$400.00
|
| W737 |
 |
Unmarked hi grade vintage
watch movement. It is 25mm wide and stem wind / nail set. It has a
good staff and if you apply a little extra power to the train, it does
run. Very clean with no rust. The dial snaps on, so this could be used
as a wristwatch movement or a pocket watch movement.
It looks similar to a Patek movement.
Sold as-is for parts or repair. |
$85.00
|
| W721 |
 |
Matile & Mosimann high grade pocket watch movement that was made in
Chaux de Fonds Switzerland. It is 36 mm wide and key wind/ key set. It
is not running. The arbor is there for the seconds hand. The balance is
broken. the center pinion is missing. Someone has done a crappy repair
to the click spring on the mainspring barrel, they cut a piece of
another bridge and put it over the top of the original bridge. Dirty
and spotted but no rust.
Sold as-is for parts or repair. |
$60.00
|
| W722 |
 |
Jules Huguenin high grade pocket watch movement that was made in
Switzerland. It is 45 mm wide and key wind/ key set. It has a right
angle lever. It does run but there is a lot of end play in the balance,
either the staff is broken or it has a broken jewel. The balance
doesn't really rock or tip, but there is a lot of end play. The
movement is not marked. The arbor is there for the seconds hand. No
rust.
Sold as-is for parts or repair. |
$75.00
|
